환자의 안전한 이송과 조기재활을 위한 다양한 장비들을 소개합니다.
중환자의 재활을 위한 특별히 설계된 기구들은 환자의 빠른 회복과 운동성을 향상시킵니다.
노약자, 장애인, 치매환자, 중환자를 위한 첨단 장비들을 사용해 보십시오.
MULTIFUNCTIONAL POSITIONING AID FOR EARLY
MOBILISATION AND ICU REHABILITATION
Where edge of bed sitting is likely to be difficult to achieve, but early weight bearing and upright positioning are desirable,
the Sara Combilizer multiposition aid can be utilised to help achieve out of bed rehabilitation goals early in the care pathway.
Patients can be easily transferred from bed to Sara Combilizer using a
choice of lateral transfer techniques. The height adjustable, flat stretcher position helps facilitate lateral transfers to and from the device
Slide sheets
Air assisted transfer
Ceiling lifter
Following transfer to Sara Combilizer a choice of positioning options are available:
Combining stretcher, chair and tilting standing position in one device reduces the need for multiple transfers
Reduced transfers Flexibility to switch from sitting to tilting/ standing at the touch of a button reduces need to transfer patients between devices
Chair position with tilt in space
and lateral tilt position
Progressive tilting
Full standing position
The sitting position has a number of benefits both physically5 and psychologically. Upright posture challenges the patients sitting balance and trunk control and can be adjusted according to their current ability. A more upright posture will also support functional tasks such as eating and drinking, brushing teeth or communicating with family. There are benefits psychologically for the patient and their relatives and caregivers as mobility progresses out of bed.
Due to the more gradual change to a sitting position, the Sara Combilizer can provide a safe and controlled method to continue early mobilisation with more challenging patients.
As the Sara Combilizer is mobile it enables the patient to be wheeled short distances often to the window to give the patient a new perspective and get in touch with the outside world again.
Safety straps help secure the patient in position
For patients with a reduced Glasgow Coma Scale (GCS), postural hypotension or who are ready to commence more active rehabilitation the tilting to standing position of the Sara Combilizer could be used.6 This position may also be helpful for more alert patients who still have limited sitting balance and are unable to stand.
Standing has been shown to provide an excellent method of increasing arousal whilst facilitating weight-bearing through the lower limbs, helping prevent joint contractures and improving lower limb strength.
Adjustable straps to support the knees and trunk make this a very stable position, while the addition of the head support and strap could be beneficial for those patients with a low GCS to maintain a more supported posture.
An inclinometer provides a method of tracking the tilt angle achieved to help set ongoing mobility goals.
The full tilt position allows standing and full weight bearing to be achieved early in the patient’s care pathway to support additional activities in the patient’s rehabilitation plan.
With increasing emphasis on early mobility and rehabilitation initiatives starting in the ICU as soon as patients are clinically stable, the Sara Combilizer has proven to be a versatile aid enabling caregivers to initiate out of bed mobilisation earlier with more complex patients during the acute phase of their critical illness
Control panel
Inclinometer
Head cushion and optional head strap
| Space requirements | |
|
|
| PRODUCT INFORMATION | |
| Length, seated position | 1580 mm (62 1/4”) |
| Max length, stretcher | 2045 mm (80 1/2”) |
| Width | 720 mm (29 1/2”) |
| Weight | 115 kg (265 lbs) |
| Width of seat | 510 mm (20 1/8”) |
| Depth of seat | 460 mm (18”) |
| Minimum lifting height | 588 mm (23 1/4”) |
| Maximum lifting height | 984 mm (38 3/4”) |
| Backwards tilt of seat | -25° - 0° |
| Longitudinal tilt of stretcher | -25° - +75° |
| Sideways tilt of seat/stretcher, left and right | 0° - 20° |
| Need for space at storage | 915 x 714 mm (36 x 28 1/4”) |
| Safe Working Load | 200 kg (440lbs) |
| Four fixation belts: head, trunk, hip, knee level. | |
| Electrically powered actuators 24 V | 24 V |
| Battery | 24 V |
| Emergency stop | |
| Low friction castors (4, all of them with brakes) | |
